Making the custom Epoxy resin coffee table set

Making the custom Epoxy resin coffee table set

Fatemeh Khorrami

In this article, I want to teach you how to make a beautiful epoxy table even in your own home.

First of all, I want to remind you a few things to keep in mind in building an epoxy coffee table.

The first point is that you have to use a very good and high quality epoxy resin that is both competitor and transparent, and so you have to be more resistant to the resin.

What wood to use to make a resin table?

The second point to consider is the use of wood on the epoxy resin table.

Try to use wood that is completely dry as much as possible, meaning that the wood that is moist is not very suitable for making epoxy tables if you have a wood that is slightly moist for days and can be used for days.

Not and this moisture does not cause your resin to deteriorate. Making Epoxy Resin Nesting tables Resin Template The third point to consider is to make an epoxy resin table template.

You must use molds that resin do not give me the best option I can offer them MDF molds and MDF molds with your own laminates.

Make it yourself you can stick these sticks with MDF screws or with wood glues but I suggest using MDF screws if you were in and out of the wood where this mold was completely attached to me try to use the dough well to use it.

The quality that I recommend epoxy resin without completely dry wood and the third is a very good MDF cottage and Higlas. First you have to primarily primer your woods Primer means that you have to fill all the holes in your woods.

You can do it with sealers or do your own epoxy resin if you want to sell paint and paint with all colors and paint. You can use them.

Note that if you want to use a sealer you must apply more than five layers to the cartoon and make sure that each layer should be dry so that you can apply to the cylinder after each layer of soft sanding. The quality of your work will be better. Bubble Nash.

The second way to type your wood with epoxy resin is to mix two to one resin and hardener with a latex glove and mix the whole wood to the epoxy resin and hardener.

Try to do it for two or three steps. Have your own woods around and do not let the windows get out of the wood and enter the epoxy resin day and get your work out of beauty.

When the primer is done, we go to place the wood in the molds we have made with MDF, so that the woods are completely fixed and fixed. Put heavy weights or fix the carpentry tools completely and fix it.

Now we need to add epoxy resin to our mold. Consider it to add epoxy resins to layer layers. My suggestion is that you have less than one centimeter to work when you have less than one centimeter.

Torch or by eliminating possible lighters try to stay upstairs for at least the first 5 minutes and do not let go of the bubbles and avoid them when you have finished the first layer for 2 hours and you can add your second layer resin to your second layer.

The thickness is less than 2 cm, of course you can pour more, but keep in mind that your resin will be more than 2 cm high so it is about 2 cm or less suitable for less than 2 cm.

Well now you are complete and we can remove any molds or molds. Remove the ureter from the resin because we used the MDF Higgles molds.

It would be very easy. Now we have a resin that will probably be unpleasant and have no special beauty. You can completely clean the work with professional chainsaws or make it perfect for it.

To do your job faster When you polish all the work we go to the polishing skin stage. How to do polish is this way you have to use soft shells to keep your work very smooth.

Keep in mind that you should first use lip kisses. We recommend starting the skin to 1, and after this resolution # 1 after that number 2 and then # 1 and then # 1 and then this day. Make it a # 1 thousand and then a boy number 2 that soft shells like number 1 and number 2 and number 2 must be combined with water to make your work more soft and delicate.

Clean each cartoon step if you have a chance to clean the soil and if you use it completely. When the step is over, you are now working on the polishing stage.

Try using resin polishes to achieve all of its beauty and quality. Of course, many friends ask if we can use car polishes. I can tell you that if you find money and money, you can find money.

Use it and then soft polish. I want to pay for your cartoon with the machine. My suggestion is to pay for about 2 minutes per square meter, but if you want to do it by hand, you have to make between 2 and 3 minutes for each square meter. You have to pay for the vaccination stage.

There is resin and you can also use professional car waxes for epoxy resins when you have completely waxed your work and your cartoon is completely shiny with a cloth that does not work.

Epoxy resin coffee table set

Well congratulations, you have just made an epoxy resin coffee table that is perfectly smooth and is completely shiny and completely transparent, but there are other key points, such as using polyurethanes that you can use in later articles.

Creating shiny and shiny effects in epoxy resin
 Usually, everything that is bright and shiny is noticed by humans.  For this reason, people always seek to create shine in the tools and devices around them for more beauty.  Creating shine and glitter in epoxy resin is one of these ways.  You can make the effect of any place or device extraordinary by applying the shining state to epoxy resin projects such as on tables, counters, panels and various accessories.  In this article, two methods are introduced to create shine in resin projects.
One of the most beautiful and brilliant things that can be done for resin projects is the use of nightshade powders in the epoxy resin mixture.
The mechanism of these nocturnal colors is that they are charged by ultraviolet rays and then glow in the dark.
Our work starts with buying or creating molds made of silicone, this work can also be applied to different surfaces. 
Once you have determined the type of project you need, determine the amount of resin you need, then pour the required resin and hardener in the correct ratio into a mixing cup. 
Decide on your colors.  Depending on what you want to achieve, you can use one or more colors.
 To calculate the required weight or volume of paint powder, just divide your resin amount by 5.  For example, if the weight of epoxy resin is 20 grams, divide 20 by 5, which is 4 grams, and as a result, the amount of paint powder used will be 4 grams.
 We add the powder to the resin mixture and start stirring. Note that you should not be too hasty while stirring.  This slow and continuous method will save you from air bubbles. 
After the mixture is prepared, the resin is ready to be poured into the desired mold or surface.
After pouring the resin into the mold, use a toothpick to remove the bubbles on the surface.  You can also use a torch or a hair dryer to remove the bubbles. 
After this work, cover the molds with an empty box to protect them from any unwanted extra materials such as dust and insects and let it stay for at least 24 hours to harden completely.
In molded works, it is possible after  When the work comes out of the mold, notice the presence of excesses and roughness on the surface of the work. 
In this case, to have a smooth surface, you can use sandpaper to get rid of defects.  Using waterproof sandpaper after soaking it in some water can give you good results. 
Now your work is finished and you can enjoy the magic of night view colors in your work at night and in the dark.
 Another brilliant project that can be carried out in resin works is to create the state of shiny dust on resin panels.  This method is unique in ocean and galaxy design panels.
Among the materials that can be added for this purpose are: regular wreaths, holographic shiny particles and...
There are several ways you can apply these shiny particles on your pictures and boards.  One of these methods is to sprinkle shiny particles on the work by taking some crown powder between your fingers and pouring it with a gentle rubbing motion in certain areas of your newly designed and still liquid painting.
Observing the harmony between the applied colors and the garland particles creates a special effect.
Another method is to combine these particles with resin liquid and then use them in the panel according to your methods.
Also, if after the work is finished and the resin hardens, you think that some shiny particles can make your work more complete and attractive, it is still not too late.
You can easily use special acrylic adhesives that are transparent in the market.  
did  Mix the particles with glue and apply on the work.  After drying, this glue dries transparently and the appearance of the work is no different from the previous ones.
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.