Make the Rustic Epoxy coffee table

Epoxy resin is a magical substance with which you can make anything you like, you just need to learn the art of epoxy and painting.

One of the arts that I am very interested in is matching the color of the home decor with the table that I am going to make, a table that I can make with epoxy and walnut wood.

one day when I was walking in the park, some pieces of wood made our minds busy.

I collected the wood and took it to the workshop and cut them with the art of epoxy and wood paint. I combined the wood with resin.  

And I started to make it

First of all, we must know about the art of epoxy resin that the wood must be completely dry, and if the wood is wet, we must put it in a nice place where it is warm and dry, and there is no moisture. 

 Let it dry completely and when it is dry, we have to smooth the wood with a polisher.

I found some beautiful ready-made wood designs and dried them. After a full week of drying with polish, I smoothed the Rona and then took it to the wood workshop. 

 I used it to make a table

Resin must be made in dry temperature, together with wood, they are a wonderful combination that can make many beautiful designs.

For us, I used the color that was my favorite and with the decor of my room, and I had to start painting my favorite color, white. 

 and it was golden, the walls of the house were white and some of the household items were golden, and I would like to make a table with white and gold color and the color of wood.

 After we have greased it, we put the wood that we smoothed in advance and we put the epoxy resin in the mold and we add whatever color we want to it and we leave it for 24 hours so that it dries completely, epoxy resin 24 hours  It dries completely, and it depends on the thickness of the epoxy.

The thicker the epoxy, the longer it takes to heal, and again, it depends on the type of resin.

I put it in a room with a temperature of at least 25 degrees Celsius and poured one centimeter of resin and let it dry.

The next day, when the diet of the previous day is dry, the next day, we put the second layer, when we put the second woman, the size of one centimeter, let it dry for 24 hours, and after that, we have a table with the desired format, and all this table is in the project machine. 

 We place it on the table, smooth it completely and smooth its edges and pour a special wood oil on the table

The combination of wood and magical substance called epoxy resin in home decoration is very impressive, very beautiful and attractive

The resin can be colored with any favorite color.

The movement of the resin is done with special resin colors.

The colors that are suitable for the resin are paste colors. There are many beautiful pastes, such as green, white, gray, red, which are available in the market as a paste.  It is available.

Put them in the resin in a small amount. It should dissolve well. It is easy to dissolve the colors in the diet with a wooden spatula and we should dissolve them for 5 to 10 minutes.

The temperature of my room should be warm and not cold.  It should be low and after the paint and resin are mixed together, it will be nice and airy

that we have to remove these bubbles, there are some substances that we pour in to catch the bubbles inside, and some use a gas lighter to extract the bubbles from the inside.

To get the bubbles out of the resin, I use a gas lighter.  It is placed directly in the right angle on the very short diet

When we put the lighter on the resin, it should be very small and short, because it will burn the resin. After we pour it, I touch it and pass it until it is good.

 Let the dust sit on the resin and enjoy it well

During the time when the resin is drying, it will gradually change from its soft state and turn into a gel time state, and after the gel state, it will harden like a jelly, which is much better to leave open for the next 24 hours.

 The entire surface of the diet should become glass

The wood that is used to work with resin is called the right leg, the wood of various trees is used, the walnut tree, the elder tree and other fruit trees that he cuts and they have beautiful shapes, they put them in a dry place that  It should be perfectly fine and we know that moisture will damage the resin even if a drop of water is poured into the resin, it will be damaged.

We should use general wood.

We should dry the wood completely.

When the wood dries, it becomes lighter and this makes the diet not penetrate into the wood.

The color that I used for the table is transparent colors, I don't use ink colors for rubber, and I can use powder colors or if ink colors are used, they make light by themselves, they are very beautiful,

and if  If we put the light inside the circle, it should multiply

The durability of rustic wood is very high and it maintains its resistance for several years. It is very durable and has a very beautiful sound. It gives your home a beautiful and modern look.

A modern table is very effective in combination with home decor.